FAQ

Accessories

Please note that the numbers are not necessarily in sequential order.

Pressure gauge assembly (part of Adaptor kit 56-4115-32, item no 14 in the component list) includes pressure gauge with CPM connectors, CPM fitting, CPM O-ring and Clamp 50 mm TC.

Something went wrong - we were not able to load your agreed MSA pricing. Please try refreshing the page.
# Product Name Product Code Price
2 Gasket o.d. 25 mm i.d 13 mm (0.5 inch) 56411286 10.66 USD Add to cart
Get Quote
3 Clamp 25 mm TC 56410665 156.27 USD Add to cart
Get Quote
6 25 mm TC i.d.13 mm (0.5") - 9.5 mm (0.375") Hose Barb 56411397 108.92 USD Add to cart
Get Quote
7 Peristaltic Tubing, size 18, 3.1 m, i.d. 9.5 mm, bioprene 56410619 165.75 USD Add to cart
Get Quote
9 Diaphragm Valve 25 mm (0.5") TC Connections, stainless steel 56411295 1 129.00 USD Add to cart
Get Quote
Clamp 50 mm TC 56410667 113.65 USD Add to cart
Get Quote
Gasket 25 mm (0.5") TC i.d. 13 mm, silicone 56410994 75.77 USD Add to cart
Get Quote
Gasket 25 mm (0.75") TC i.d. 19 mm, silicone 56410995 75.77 USD Add to cart
Get Quote
Gasket 50 mm (1.5") TC i.d. 38 mm, silicone 56410996 88.79 USD Add to cart
Get Quote
CPM O-Ring 56411389 157.45 USD Add to cart
Get Quote

When running FlexStand Holder with peristaltic pump, the maximum pressure that can be achieved is 2 bar g (30 psi g).

The use of a permeate flow control is strongly recommended during upstream clarification of target material. 

A permeate control valve or a permeate flow control kit together with a pump for the flow rate is required for permeate flow control. Permeate flow control rate is dependent on the process flux (LMH) and surface area. 

Detailed information about the Permeate flow control kit (56-4107-73), Permeate control valve (56-4105-89) and peristaltic pump, flow rates 5.4 ml/min - 2 liter/min (56-4106-53), is available below. 

For countries using 220 V power, power cords have to be ordered separately for the feed and permeate flow control pumps.

Feed pump (11-0005-66 or 11-0005-67), Feed reservoir (56-4107-67 or 56-4107-70), Outlet pressure gauge for FS-03LVS (56-4106-04), Outlet pressure gauge for FS-03LVS-30 ( 56-4106-03) and Tubing (56-4106-19) have to be ordered separately. Detailed information about these products is available below.

After use, store the cartridge with liquid inside using blank off cap, gasket and clamp on the feed and retentate ports.

Seal the permeate port with a short piece of tubing i.d. 9.5 mm, which is secured using snapper clamp, pinch valve or cable tie wrap. The end is closed with pinch clamp, snapper clamp or cable tie wrap.

Something went wrong - we were not able to load your agreed MSA pricing. Please try refreshing the page.
# Product Name Product Code Price
2 Clamp 25 mm TC 56410665 156.27 USD Add to cart
Get Quote
3 QuixStand Accessory Kit 56410750 439.00 USD Add to cart
Get Quote
4 Peristaltic Tubing, size 18, 3.1 m, i.d. 9.5 mm, bioprene 56410619 165.75 USD Add to cart
Get Quote
5 Tubing Valve for Tubing o.d. 9.5 mm–13 mm 56410589 74.58 USD Add to cart
Get Quote
6 QuixStand Accessory Kit 56410750 439.00 USD Add to cart
Get Quote
6 Gasket 25 mm (0.5") TC i.d. 13 mm, silicone 56410994 75.77 USD Add to cart
Get Quote
Pressure Gauge 0-2 barg (0-30 psig) 50 mm (1.5") TC, back mount, autoclavable 56410603 964.00 USD Add to cart
Get Quote
Pressure Gauge 0-4 barg (0-60 psig) 50 mm (1.5") TC, back mount, autoclavable 56410604 964.00 USD Add to cart
Get Quote
Peristaltic Pump Dual Voltage 56410653 2 658.00 USD Add to cart
Get Quote
Clamp 25 mm TC 56410666 111.50 USD Add to cart
Get Quote
Clamp 64 mm (2") TC 56410670 85.24 USD Add to cart
Get Quote
Manual Permeate Control Kit, includes vacuum/pressure gauge, backpressure valve, supports, adapters, clamps, and gaskets 56410773 2 147.00 USD Add to cart
Get Quote
25 mm (0.5") TC 9.5 mm (0.375") Barb 56410980 127.86 USD Add to cart
Get Quote
25 mm (0.5") TC Blank-Off Cap, polysulfone 56410989 59.31 USD Add to cart
Get Quote
Gasket 64 mm (2") TC i.d. 50 mm, silicone 56410998 105.37 USD Add to cart
Get Quote

Please note that the numbers are not necessarily in sequential order.

Pressure gauge assembly (part of Adaptor kit 56-4115-32, item no 14 in the component list) includes pressure gauge with CPM connectors, CPM fitting, CPM O-ring and Clamp 50 mm TC.

Something went wrong - we were not able to load your agreed MSA pricing. Please try refreshing the page.
# Product Name Product Code Price
2 Gasket o.d. 25 mm i.d 13 mm (0.5 inch) 56411286 10.66 USD Add to cart
Get Quote
3 Clamp 25 mm TC 56410665 156.27 USD Add to cart
Get Quote
6 25 mm TC i.d.13 mm (0.5") - 9.5 mm (0.375") Hose Barb 56411397 108.92 USD Add to cart
Get Quote
7 Peristaltic Tubing, size 18, 3.1 m, i.d. 9.5 mm, bioprene 56410619 165.75 USD Add to cart
Get Quote
Peristaltic Pump P-1 18111091 3 332.00 USD Add to cart
Get Quote
Clamp 50 mm TC 56410667 113.65 USD Add to cart
Get Quote
Gasket 25 mm (0.75") TC i.d. 19 mm, silicone 56410995 75.77 USD Add to cart
Get Quote
Kvick Lab Pressure Gauge Kit, 0–4 bar 56411369 5 128.00 USD Add to cart
Get Quote
CPM O-Ring 56411389 157.45 USD Add to cart
Get Quote

Running Xampler Cartridge Housing Size 4 (inlet and outlet barb connections) with QuixStand System.


The use of a permeate flow control is strongly recommended during upstream clarification of target material. 

A permeate control valve or a permeate flow control kit together with a pump for the flow rate is required for permeate flow control. Permeate flow control rate is dependent on the process flux (LMH) and surface area. Detailed information about Permeate control valve (56-4105-89) and Permeate flow control kit (56-4107-73), is available below.

Suitable peristaltic pump (56-4106-53) for permeate flow control, flow rates 5.4 ml/min - 2 liter/min.

For countries using 220 V power, power cords have to be ordered separately for the pump above and system. 

Something went wrong - we were not able to load your agreed MSA pricing. Please try refreshing the page.
# Product Name Product Code Price
2 Clamp 25 mm TC 56410666 111.50 USD Add to cart
Get Quote
3 Gasket 25 mm (0.5") TC i.d. 13 mm, silicone 56410994 75.77 USD Add to cart
Get Quote
4 Peristaltic Tubing, size 18, 3.1 m, i.d. 9.5 mm, bioprene 56410619 165.75 USD Add to cart
Get Quote
5 Tubing Valve for Tubing o.d. 9.5 mm–13 mm 56410589 74.58 USD Add to cart
Get Quote
6 QuixStand Accessory Kit 56410750 439.00 USD Add to cart
Get Quote
Peristaltic Pump Dual Voltage 56410653 2 658.00 USD Add to cart
Get Quote
Manual Permeate Control Kit, includes vacuum/pressure gauge, backpressure valve, supports, adapters, clamps, and gaskets 56410773 2 147.00 USD Add to cart
Get Quote
25 mm (0.5") TC 9.5 mm (0.375") Barb 56410980 127.86 USD Add to cart
Get Quote
25 mm (0.5") TC Blank-Off Cap, polysulfone 56410989 59.31 USD Add to cart
Get Quote

The use of a permeate flow control is strongly recommended during upstream clarification of target material. 

A permeate control valve or a permeate flow control kit together with a pump for the flow rate is required for permeate flow control. Permeate flow control rate is dependent on the process flux (LMH) and surface area. Detailed information about Permeate control valve (56-4105-89), Permeate flow control kit (56-4107-73) and peristaltic pump, flow rates 5.4 ml/min - 2 liter/min (56-4106-53), is available below.

Feed reservoir (56-4107-67 or 56-4107-70) has to be ordered separately. Detailed information can be found below.

For countries using 220 V power, power cords have to be ordered separately for the feed and permeate flow control pumps.

Something went wrong - we were not able to load your agreed MSA pricing. Please try refreshing the page.
# Product Name Product Code Price
2 Clamp 25 mm TC 56410665 156.27 USD Add to cart
Get Quote
3 Gasket 25 mm (0.5") TC i.d. 13 mm, silicone 56410994 75.77 USD Add to cart
Get Quote
4 Peristaltic Tubing, size 18, 3.1 m, i.d. 9.5 mm, bioprene 56410619 165.75 USD Add to cart
Get Quote
5 Tubing Valve for Tubing o.d. 9.5 mm–13 mm 56410589 74.58 USD Add to cart
Get Quote
6 QuixStand Accessory Kit 56410750 439.00 USD Add to cart
Get Quote
Peristaltic Pump Dual Voltage 56410653 2 658.00 USD Add to cart
Get Quote
Clamp 25 mm TC 56410666 111.50 USD Add to cart
Get Quote
Clamp 64 mm (2") TC 56410670 85.24 USD Add to cart
Get Quote
Manual Permeate Control Kit, includes vacuum/pressure gauge, backpressure valve, supports, adapters, clamps, and gaskets 56410773 2 147.00 USD Add to cart
Get Quote
25 mm (0.5") TC 9.5 mm (0.375") Barb 56410980 127.86 USD Add to cart
Get Quote
25 mm (0.5") TC Blank-Off Cap, polysulfone 56410989 59.31 USD Add to cart
Get Quote
Gasket 64 mm (2") TC i.d. 50 mm, silicone 56410998 105.37 USD Add to cart
Get Quote

Running Xampler Cartridge Housing Size 4 (inlet and outlet barb connections) with stand alone pump.


The use of a permeate flow control is strongly recommended during upstream clarification of target material.

A permeate control valve or a permeate flow control kit together with a pump for the flow rate is required for permeate flow control. Permeate flow control rate is dependent on the process flux (LMH) and surface area. Detailed information about Permeate control valve (56-4105-89) and Permeate flow control kit (56-4107-73) is available below.

Suitable peristaltic pump (56-4106-53) for permeate flow control, flow rates 5.4 ml/min - 2 liter/min.

For countries using 220 V power, power cords have to be ordered separately for the feed and permeate flow control pumps.

Something went wrong - we were not able to load your agreed MSA pricing. Please try refreshing the page.
# Product Name Product Code Price
3 Peristaltic Tubing, size 18, 3.1 m, i.d. 9.5 mm, bioprene 56410619 165.75 USD Add to cart
Get Quote
4 Tubing Valve for Tubing o.d. 9.5 mm–13 mm 56410589 74.58 USD Add to cart
Get Quote
5 Pressure Gauge Kit, 0–2 bar 56410609 455.00 USD Add to cart
Get Quote
Peristaltic Tubing, size 82, 7.6 m, i.d. 13 mm, bioprene 56410622 570.00 USD Add to cart
Get Quote
Peristaltic Pump Dual Voltage 56410653 2 658.00 USD Add to cart
Get Quote
Manual Permeate Control Kit, includes vacuum/pressure gauge, backpressure valve, supports, adapters, clamps, and gaskets 56410773 2 147.00 USD Add to cart
Get Quote

The use of a permeate flow control is strongly recommended during upstream clarification of target material. 

A permeate control valve together with a pump for the flow rate is required for permeate flow control. Permeate flow control rate is dependent on the process flux (LMH) and surface area. Detailed information about Permeate control valve (56-4105-89) and peristaltic pump, flow rates 5.4 ml/min - 2 liter/min (56-4106-53), is available below.

For countries using 220 V power, power cords have to be ordered separately for the peristaltic pump above.

After use, store the cartridge with liquid inside using blank off cap, gasket and clamp on the feed and retentate ports.

Seal the permeate port with a short piece of tubing i.d. 9.5 mm, which is secured using cable tie wrap. The end is closed with snapper clamp or cable tie wrap.

Something went wrong - we were not able to load your agreed MSA pricing. Please try refreshing the page.
# Product Name Product Code Price
2 Gasket 25 mm (0.5") TC i.d. 13 mm, silicone 56410994 75.77 USD Add to cart
Get Quote
2 Gasket o.d. 25 mm i.d 13 mm (0.5 inch) 56411286 10.66 USD Add to cart
Get Quote
3 Clamp 25 mm TC 56410665 156.27 USD Add to cart
Get Quote
5 Tubing Valve for Tubing o.d. 9.5 mm–13 mm 56410589 74.58 USD Add to cart
Get Quote
7 Peristaltic Tubing, size 18, 3.1 m, i.d. 9.5 mm, bioprene 56410619 165.75 USD Add to cart
Get Quote
11 QuixStand Accessory Kit 56410750 439.00 USD Add to cart
Get Quote
Peristaltic Pump Dual Voltage 56410653 2 658.00 USD Add to cart
Get Quote
Clamp 25 mm TC 56410666 111.50 USD Add to cart
Get Quote
25 mm (0.5") TC 9.5 mm (0.375") Barb 56410980 127.86 USD Add to cart
Get Quote

Contact