FAQ

Accessories

Make sure you have all connectors and tubing needed for packing and running the column.

Depending on your system configuration and column length, you may need extra long tubing to connect your column.

2x Fingertight connector 1/16" Male, 2x Union 1/16" female-1/16" female and 2x Fingertight stop plug 1/16" are supplied with the column.

Something went wrong - we were not able to load your agreed MSA pricing. Please try refreshing the page.
# Product Name Product Code Price
1 PEEK Tubing, 2 m, i.d. 1.0 mm, o.d. 1/16" 18111583 64.31 USD Add to cart
Get Quote
2 Fingertight Connector 1/16" Male 18117263 63.11 USD Add to cart
Get Quote
3 Union 1/16" female-1/16" female 11000339 127.92 USD Add to cart
Get Quote
4 Fingertight Stop Plug, 1/16'' 11000355 59.54 USD Add to cart
Get Quote
Tubing cutter, for PEEK, EFTE, and FEP tubing i.d. 0.25, 0.5, 0.75, 1 and 1.6 mm 18111246 75.02 USD Add to cart
Get Quote
Column Holder 28956282 108.00 USD Add to cart
Get Quote
Column Clamp 28956319 65.00 USD Add to cart
Get Quote
Accessory kit for HiScale 16 columns 28966367 85.00 USD Add to cart
Get Quote

 

Make sure you have all connectors and tubing needed for packing and running the column.

Depending on your system configuration and column length, you may need extra long tubing to connect your column.

2x Fingertight stop plug 1/16", 2x Union 1/16" female-1/16" female and 2x Fingertight connector 1/16" male are supplied with the column.

Something went wrong - we were not able to load your agreed MSA pricing. Please try refreshing the page.
# Product Name Product Code Price
1 PEEK Tubing, 2 m, i.d. 1.0 mm, o.d. 1/16" 18111583 64.31 USD Add to cart
Get Quote
2 Fingertight Connector 1/16" Male 18117263 63.11 USD Add to cart
Get Quote
3 Union 1/16" female-1/16" female 11000339 127.92 USD Add to cart
Get Quote
5 Fingertight Stop Plug, 1/16'' 11000355 59.54 USD Add to cart
Get Quote
6 Column tube assembly 28966646 523.00 USD Add to cart
Get Quote
6 Column tube assembly 28966652 679.00 USD Add to cart
Get Quote
Tubing cutter, for PEEK, EFTE, and FEP tubing i.d. 0.25, 0.5, 0.75, 1 and 1.6 mm 18111246 75.02 USD Add to cart
Get Quote
Short column holder, for columns 10 to 50 mm o.d. 18111317 165.51 USD Add to cart
Get Quote
Long Column Holder, columns 26 mm i.d. 18112632 244.00 USD Add to cart
Get Quote
Column Holder 28956282 108.00 USD Add to cart
Get Quote
Column Clamp 28956319 65.00 USD Add to cart
Get Quote
Spanner wrench 28964776 86.00 USD Add to cart
Get Quote
Accessory kit for HiScale 16 columns 28966367 85.00 USD Add to cart
Get Quote
O-ring packing connector 28966653 60.00 USD Add to cart
Get Quote
Packing tube 40 for HiScale 16 columns 28986815 979.00 USD Add to cart
Get Quote
Packing tube 20 HiScale 16 28986816 760.00 USD Add to cart
Get Quote

Something went wrong - we were not able to load your agreed MSA pricing. Please try refreshing the page.
# Product Name Product Code Price
1 Spanner wrench 28964776 86.00 USD Add to cart
Get Quote
2 Long Column Holder, columns 26 mm i.d. 18112632 244.00 USD Add to cart
Get Quote
3 Short column holder, for columns 10 to 50 mm o.d. 18111317 165.51 USD Add to cart
Get Quote
4 Superloop, 1/16" fittings, 10 ml 18111381 910.00 USD Add to cart
Get Quote
5 Superloop, 1/16" fittings (ÄKTAdesign), 50 ml 18111382 1 056.00 USD Add to cart
Get Quote
6 Superloop Complete, 150 ml, M6 fitting 18102385 1 259.00 USD Add to cart
Get Quote
7 Fingertight Union 1/16" Male/M6 Female 18111258 103.59 USD Add to cart
Get Quote
8 Connector 1/16" Male/Luer Female 18111251 82.16 USD Add to cart
Get Quote
9 Net for Columns, i.d 16 mm, 10 µm 18876101 60.00 USD Add to cart
Get Quote
10 PEEK Tubing, 2 m, i.d. 1.0 mm, o.d. 1/16" 18111583 64.31 USD Add to cart
Get Quote
11 Tubing cutter, for PEEK, EFTE, and FEP tubing i.d. 0.25, 0.5, 0.75, 1 and 1.6 mm 18111246 75.02 USD Add to cart
Get Quote
13 O-ring packing connector 28966653 60.00 USD Add to cart
Get Quote
14 Column tube assembly 28966646 523.00 USD Add to cart
Get Quote
15 Column tube assembly 28966652 679.00 USD Add to cart
Get Quote
16 Column Holder 28956282 108.00 USD Add to cart
Get Quote
17 Column Clamp 28956319 65.00 USD Add to cart
Get Quote
18 Accessory kit for HiScale 16 columns 28966367 85.00 USD Add to cart
Get Quote

Spare parts

Figure. HiScale 16 column.

Something went wrong - we were not able to load your agreed MSA pricing. Please try refreshing the page.
# Product Name Product Code Price
1 Adapter complete for HiScale 16 28966383 397.00 USD Add to cart
Get Quote
7 Column tube assembly 28966646 523.00 USD Add to cart
Get Quote
7 Column tube assembly 28966652 679.00 USD Add to cart
Get Quote
8 Fingertight Stop Plug, 1/16'' 11000355 59.54 USD Add to cart
Get Quote
9 Union 1/16" female-1/16" female 11000339 127.92 USD Add to cart
Get Quote
11 Fingertight Connector 1/16" Male 18117263 63.11 USD Add to cart
Get Quote
22 O-Ring, 10.3 × 2.4 mm 19016301 47.00 USD Add to cart
Get Quote
24 Support Screen for Column, i.d. 16 mm 19065101 41.00 USD Add to cart
Get Quote
25 Net ring 20 µm 28966379 77.00 USD Add to cart
Get Quote
Accessory kit for HiScale 16 columns 28966367 85.00 USD Add to cart
Get Quote

O-rings and nets should be checked regularly for wear. Worn O-rings may not seal properly and over-used nets can affect distribution. Inspect the O-rings and evaluate the height equivalent to a theoretical plate (HETP) and peak asymmetry factor (As) to prevent poor performance due to old nets. 

We recommend you to change the nets and O-rings when needed or at least annually. Please keep a set of each on your site, the code numbers refer to the table below.

Something went wrong - we were not able to load your agreed MSA pricing. Please try refreshing the page.
# Product Name Product Code Price
1 PEEK Tubing, 2 m, i.d. 1.0 mm, o.d. 1/16" 18111583 64.31 USD Add to cart
Get Quote
2 Support Screen for Column, i.d. 16 mm 19065101 41.00 USD Add to cart
Get Quote
3 O-Ring, 10.3 × 2.4 mm 19016301 47.00 USD Add to cart
Get Quote
4 Net ring 20 µm 28966379 77.00 USD Add to cart
Get Quote
5 Spanner wrench 28964776 86.00 USD Add to cart
Get Quote
7 Accessory kit for HiScale 16 columns 28966367 85.00 USD Add to cart
Get Quote
8 Tubing cutter, for PEEK, EFTE, and FEP tubing i.d. 0.25, 0.5, 0.75, 1 and 1.6 mm 18111246 75.02 USD Add to cart
Get Quote

Troubleshooting

Find solutions to product related issues. For unlisted issues please contact local Cytiva service representation.

Poor product recovery

Select the description that fits with your symptom

Worrying peak shape

Select the description that fits with your symptom

Drifting baseline

Select the description that fits with your symptom

Poor reproducibility

Select the description that fits with your symptom

Poor packing evaluation result

On this troubleshooting site, we refer to leading and tailing peaks as defined according to the following figures.
 
 

Leading peak Tailing peak

 
Experience shows that the best method of expressing the efficiency of a packed column is in terms of its height equivalent to a theoretical plate (HETP), reduced plate number (h) and its peak asymmetry factor (As). 

Please be aware of that for small columns, less than 10 ml bed volume, the system dead volume has an impact on the column evaluation values.

Issues related to Poor packing evaluation result

General advice to achieve good performance

Before using the system make sure that:

  • The correct system has been selected in UNICORN System Control
  • The correct wavelength has been set for UV/UPC monitor
  • All tubing has been properly connected
  • All connectors are free from leakage
  • No tubing is folded or twisted
  • Online filter, if used, is changed on a regular basis
  • Correct buffers are used for the chosen columns and proteins
  • All inlet tubing has been immersed in correct buffer solutions
  • Enough buffer has been prepared
  • Buffers have been equilibrated to the environment temperature
  • Buffers/eluents have been degassed if necessary (e.g., in RPC runs)
  • Suitable columns have been selected for the target proteins
  • Columns have been cleaned and prepared according to column instructions
  • Samples have been clarified by centrifugation and/or filtration prior to sample loading
  • Samples have been adjusted to binding buffer conditions
  • Auto sampler (if used) has been prepared according to user manual
  • The fraction collector has been filled with appropriate number of microtiter plates or tubes
  • Appropriate arrangement for waste handling has been prepared

Column leakage

Select the description that fits with your symptom

Unsatisfactory elution

Select the description that fits with your symptom

Back pressure increases during operation

Unusual column appearance

Select the description that fits with your symptom

Strange peaks

Select the description that fits with your symptom

Contact