Recirculation Tubing Kit with Small i.d. for ÄKTAcrossflow

The following diagram shows the postions of the components and tubing in the ÄKTAcrossflow liquid flow path.

For the recirculation kit, please refer to the red marked tubing.

 

Please note that the tubing length given in the table can slightly differ from the length of the tubing in the kit.

Tubing Length (mm)	Length (mm)	I.d. (mm)	Material	Location
				From	To
F3S	155	1.7	PVDF	Feed pump A (left, upper)	Sensor PF inlet
				Feed pump B (right upper)
F4S	110	1.7	PVDF	Feed pump A (right, upper)	Sensor PF inlet
				Feed pump B (left, upper)
F2S	85	1.7	PVDF	Valve Block R-VB	Sensor PF outlet
F1S			See separate table below
R1S			See separate table below
R2S	90	1.7	PVDF	Sensor PR outlet	Valve block R-VB (left port)
R3S	200	1.7	PVDF	Valve Block R-VB (right port)	Valve R-PCV (inlet port)
R4S	120	1.7	PVDF	Valve R-PCV (outlet port)	Connector C1
R5S	200	1.7	PVDF	Connector C1	Reservoir, inlet port
P1S			See separate table below

 

 

Connecting tubing to Kvick Start cassette

 

Tubing	Length (mm)	O.d. (mm)	I.d. (mm)	Volume (ml)	Material	Location
						From	To
F1S	200	3	1.7	0.45	PVDF	Valve block R-VB	Casette, feed inlet
R1S	300	3	1.7	0.68	PVDF	Cassette (RET), retentate outlet	Sensor PR inlet
P1S	155	3	1.7	0.35	PVDF	Cassette (PERM1), permeate outlet	Sensor PP inlet

 

Connecting tubing to Kvick Lab packet holder

 

Tubing	Length (mm)	O.d. (mm)	I.d. (mm)	Volume (ml)	Material	Location
						From	To
F1S	200	3	1.7	0.45	PVDF	Kvick Lab Packet, retentate outlet	Kvick Lab Packet, feed inlet
R1S	300	3	1.7	0.68	PVDF	Kvick Lab Packet, retentate outlet	Sensor PR inlet
P1S	155	3	1.7	0.35	PVDF	Kvick Lab Packet, retentate outlet	Sensor PR inlet

 

Connecting tubing to cartridge

Tubing	Length (mm)	O.d. (mm)	I.d. (mm)	Volume (ml)	Material	Location
						From	To
F1S	200	3	1.7	0.45	PVDF	Valve block R-VB	Cartridge, feed inlet
R1S	300	3	1.7	0.68	PVDF	Cartridge, retentate outlet	Sensor PR inlet
P1S	155	3	1.7	0.35	PVDF	Cartridge, permeate outlet	Sensor PR inlet