Transfer/Permeate Tubing Kit for ÄKTAcrossflow
Flow path schemes
| Tubing | Length | I.d. (mm) | Material | Location | |
|---|---|---|---|---|---|
| From | To | ||||
| P2S | 170 pf | 1.7 mm | PVDF | Sensor PP outlet | Conductivity cell, inlet |
| P3S | 200 pf | 1.7 mm | PVDF | Conductivity cell, outlet | UV cell, inlet |
| P4S | 200 M | 1.7 mm | PVDF | UV cell, outlet | Permeate pump, inlets |
| P5S | 477 M | 1.7 mm | PVDF | Permeate pump outlets | Valve block P-PCV (inlet port) |
| P6S | 120 | 1.7 mm | PVDF | Valve P-PCV (outlet port) | pH cell, inlet |
| P7S | 90 pf | 1.7 mm | PVDF | pH cell, outlet | Permeate valve block P-VB (left port) |
| P8S | 380 pf | 1.7 mm | PVDF | Permeate valve block P-VB-Out (recycle part) | Sensor PT |
| T1L | 95 | 2.9 | ETFE | Air sensor | Transfer valve block 1 T-VB -In (port 1) |
| T2L | 200 | 2.9 | ETFE | Valve block 2, outlet | Valve block 1, inlet |
| T2/T4L | 610 M | 2.9 | ETFE | Valve block 1, outlet | Transfer pump A, inlets |
| T5S | 200 M | 1.7 | PVDF | Transfer pump, outlets | Flow restrictor, inlet |
| T6S | 155 pf | 1.7 | PVDF | Flow restrictor, outlet | Sensor PT |
| T7S | 510 pf | 1.7 | PVDF | Sensor PT | Transfer purge valve |
| T8S | 140 | 1.7 | PVDF | Transfer purge valve | Connector C1 |
| M = manifold (equivalent tubing length) | |||||
| pf = pre-formed tubing | |||||
Something went wrong - we were not able to load your agreed MSA pricing. Please try refreshing the page.
The following flow diagram shows the positions ot the components and tubing in the ÄKTAcrossflow liquid flow path.
For the transfer/permeate kit, please refer to the red marked tubing.
Something went wrong - we were not able to load your agreed MSA pricing. Please try refreshing the page.