Parts and accessories

A choice of either straight or elbow end adaptor kit is required for MaxCell cartridge applications:

Straight connector kit (56-4107-37)

Straight connector (56-4107-26)

Elbow connector kit (56-4107-38)

Two different wrench set available:

MaxCell standard wrench set (56-4107-39)

MaxCell wrench set with applied torque (56-4107-40)

TC clamps and gaskets for the feed, retentate and permate lines:

Clamp 50 mm TC in stainless steel (56-4106-69) or plastic (56-4106-68)

Gasket 50 mm i.d. 38 mm (1.5 inch) in silicone (56-4109-96) or nitrile (56-4109-97)

Clamp (toggle) 64 mm TC (56-4106-70)

Gasket 64 mm i.d. 50 mm (2 inch) in silicone (56-4109-98) or nitrile (11-0005-24)

To blank off the permeate, feed and retentate ports:

Blank off cap 50 mm TC in stainless steel incl. gasket (44-7135-01)

Blank off cap 50 mm TC in plastic (56-4109-90)

Clamp 50 mm TC in stainless steel (56-4106-69) or plastic (56-4106-68)

Gasket 50 mm in silicone (56-4109-96), nitrile (56-4109-97) or EPDM (18-1012-88)

Blank off cap 64 mm TC (56-4109-92)

Clamp (toggle) 64 mm TC (56-4106-70)

Gasket 64 mm in silicone (56-4109-98) or nitrile (11-0005-24)